Bruxicalm NIGHT Dental Braces

• More anatomical shape
• Thinner + more comfortable
• New design for improved usability
• Class I Medical Device

INSTRUCTIONS FOR USE:
The adjustment must be made to the teeth of the upper jaw. Steps to be taken for the correct individualization of the splint:
1.Heat water to 70°C.
2.Remove the pan from the stove.
3.Hold the splint by the protrusion with the product logo and immerse the splint in the water for 12 seconds (BXCDAY) and 30 seconds (BXCNIGHT YBXCSPORT)
4.Slightly stretch the walls of the splint to prevent the walls from folding as you insert it into the mouth, be careful not to bite the folded walls. Warning: Before inserting the splint into the mouth, shake it to remove any water residue.
5.Insert the splint into the mouth, close the mouth without clenching the teeth. With the lips closed, inhale air to perform a one-minute suction to adapt it to the shape of the teeth. At the same time, press with your fingers for a better fit.
6.After one minute, remove the splint from the mouth and place it in cold water for at least 20 minutes. The device must remain in the mouth without assistance. If this is not the case, repeat the process from point 1.
7.Finally, cut off the protrusion with the product logo above the splint.
8..If the splint is too long, cut the edges using the cutting lines. If any irregularities or folds occur in the material after personalization, remove them with scissors.